Mounting Dream Full Motion TV Wall Mount Corner Bracket with Perfect Center Design for Most of 26-55 Inch LED, LCD, OLED Flat Screen TV, Mount with Swivel Articulating Arm, up to VESA 400x400mm MD2377: Amazon.ca: Electronics

$59.99$69.49 (-10%)

TV Wall Mount for any 26-55 Inch LED, LCD, OLED Flat Screen TV

Clear
Compare
SKU: B07MXSP2GN Categories: , , , ,

Product Description

About Mounting Dream

With more than 20 years of production and design experience, Mounting Dream dedicates to providing various kinds of TV mounts with high quality and first-class service . We always adhere to customer-centric, and win a good reputation in millions of North American families.

Join with us! To achieve your Mounting Dream in a safe and simple way!

TV wall mount

tv wall mount

tv mount

tv wall mount MD2377

tv bracketSpecifications:

TV Size: for most of 26-55″ TV

Loading Capacity: up to 60LBS

VESA/TV Hole Pattern: 75x75mm, 100x100mm, 200x100mm, 200x150mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm.

Adjustable Viewing:+5°/-15° tilting, +/-90° swiveling,+/-3° leveling (maximum angle depends on TV size)

Save Space:retracts to 3″(to wall) to save space, and extends up to 19.3″ from the wall.

Note:

This tv wall mount fits for wood studs or concrete wall installation only, not for drywall. (Notice: The required anchors for concrete wall installation are not included in package to avoid any misuse. Please contact support team for additional delivery if needed.)

Hardware Included:

Lag Bolt M8x60mm (4) M8 Washer(4) Allen Key(1) M4 x 12mm Screws (4) M4 x 30mm Screws (4) M6 x 12mm Screws (4) M6 x 35mm Screws (4) M8 x 25mm Screws (4) M8 x 50mm Screws (4) M4 Washers (4) M6 Washers (4) M6 Spacers (4) M8 Spacers (4) 2.5mm Spacers (8) 10mm Spacers (4)

Package Included:

Wall plate unit, User Manual, Hardware Pack, Cable ties(3), Bubble level (1)

Additional information

Size

Dual Articulating Arm, Single Articulating Arm

Average Rating

5.00

18
( 18 Reviews )
5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Only logged in customers who have purchased this product may leave a review.

18 Reviews For This Product

  1. 18

    by Joe W Shum

    First of all, the HDMI cable was missing :p but not a big deal to me, so I let that slide.This unit is very smooth and sturdy. Quick and simple to install. Fully adjustable, other than leveling it by rotating clockwise or anti-clockwise. You can also offset it left or right so you won’t position dead on the center of the stud. My 55 inch OLED is 40 lb. I can fully extend its arm and swiveling it left and right with ease while remain sturdy.That’s why they deserve 5 stars.

  2. 18

    by T A.

    Really impressed by the quality of this TV mount, especially considering the price paid. The box had absolutely everything in it I needed to install the mount on the wall, and the instructions were clear and accurate. It only took about 10 minutes. We installed a 55″ Samsung LED TV (weighs about 35 lbs) and the mount handled it no problem. The hardest part was hanging the TV on the mount because we installed it in a corner – it helps to have a third person to hold it steady so it doesn’t get pushed back into the wall while you’re trying to secure the TV to the mount, but we managed with 2. The included HDMI cable was a nice bonus.

  3. 18

    by CONSERIERE

    J’ai placé le support sur une TV 2 32 pouces.c’est vraiment un support de très bonne qualité qui maintient superbement la télévision.Très facile à placer j’ai pu le placer seule!Je suis très heureuse de mon achat et le recommande vivement. De plus la livraison a été ultra rapide il est même arrivé à l’avance pour moi. Merci beaucoup

  4. 18

    by nishi

    Well made, sturdy steel, easy to install. Notable feature is that the television can be positioned more to the left or right. This is useful when mounting to a wall stud because they are normally located 16″ apart. This wall mount allows the television to be positioned about 8″ to the left or right of centre to make up for the fixed position of the wall studs.Easy to install. Mount the hinged part to the wall. All parts are in the kit. For mounting on a wall stud you require a drill and drill bit (size is in the instructions) to make two pilot holes in the wall, plus a wrench to install the lag bolts that secure the bracket to the wall. A small level is included in the kit. After the wall mount is secure, use the level and hex key included in the kit to adjust the mount so that the television will be level (not on a slant to the right or left). You can also use the same hex key to adjust the mount so the television will tilt down a bit.You probably require a stud finder to locate the stud accurately enough to ensure that the lag bolts are aligned close to the centre of the stud width for strength. Finally you need a Philips (star) screwdriver to attach the two vertical bars to the VESA bolt holes in the television and to secure the locking screws once the television is hung on the wall bracket.Although the instructions recommend 2 people to install the television it is easy to do with one person unless the television is too heavy to lift. I loosened the lock screws on the vertical bars attached to the television, extended the bracket mounted on the wall so that the television would be away from the wall, picked up the television from behind, then hung the television so that the inverted-U cutouts on the the vertical bars were caught on the top horizontal bar on the wall bracket. At this point the television is fairly secure so I tightened the lock screws to secure the television to the wall bracket.The kit comes with an assortment of bolts and spacers to fit the various sizes covered by the VESA standard. There are also spacers in case the television has connectors that would be located under the mounting bars. This provides a bit of space to reach the connector but you might have to connect the cable to the television then attach the mounting bars to the television using the spacers.I installed a Mounting Dream MD2413-MX earlier this year but prefer this one. The vertical bars attached to the television obstruct less of the television back than the large X on the MD2413-MX. This MD2377 mount allows the television to be positioned to the left or right of centre. This MD2377 permits levelling the television to make up for the wall mount not being installed perfectly vertically.I recommend and would buy another one of these mounts if installing another television.

  5. 18

    by T A.

    Really impressed by the quality of this TV mount, especially considering the price paid. The box had absolutely everything in it I needed to install the mount on the wall, and the instructions were clear and accurate. It only took about 10 minutes. We installed a 55″ Samsung LED TV (weighs about 35 lbs) and the mount handled it no problem. The hardest part was hanging the TV on the mount because we installed it in a corner – it helps to have a third person to hold it steady so it doesn’t get pushed back into the wall while you’re trying to secure the TV to the mount, but we managed with 2. The included HDMI cable was a nice bonus.

  6. 18

    by N David

    I bought this for my 32″ Sharp LED smart TV that I’m using for my exercise room. This is the 2nd wall mount that I’ve ever purchased, but it’s my first full motion mount. I’m very handy so installation was a breeze. The mount it solidly made, comes with a ton of hardware for different styles or TVs and wall materials, and includes 3 Velcro straps, an Allen key, and a decent looking HDMI cable. Considering it’s a full motion mount, my TV sits pretty close to the wall. Pivoting the TV left to the right is smooth and effortless. Pivoting the TV up and down requires loosening a screw, which is fairly easy to do. Overall, I’m very happy with the mount and would purchase it again.

  7. 18

    by V. Nadeau

    Vraiment parfait ! Je suis allée au magasin pour en acheter un, mais je n’ai jamais trouvé le rack parfait. J’avais un peu peur en commandant sur Amazon, malgrés les bons commentaires… Mais sérieusement je ne regrette pas du tout ! Il est juste parfait et que dire du prix !

  8. 18

    by nishi

    Well made, sturdy steel, easy to install. Notable feature is that the television can be positioned more to the left or right. This is useful when mounting to a wall stud because they are normally located 16″ apart. This wall mount allows the television to be positioned about 8″ to the left or right of centre to make up for the fixed position of the wall studs.Easy to install. Mount the hinged part to the wall. All parts are in the kit. For mounting on a wall stud you require a drill and drill bit (size is in the instructions) to make two pilot holes in the wall, plus a wrench to install the lag bolts that secure the bracket to the wall. A small level is included in the kit. After the wall mount is secure, use the level and hex key included in the kit to adjust the mount so that the television will be level (not on a slant to the right or left). You can also use the same hex key to adjust the mount so the television will tilt down a bit.You probably require a stud finder to locate the stud accurately enough to ensure that the lag bolts are aligned close to the centre of the stud width for strength. Finally you need a Philips (star) screwdriver to attach the two vertical bars to the VESA bolt holes in the television and to secure the locking screws once the television is hung on the wall bracket.Although the instructions recommend 2 people to install the television it is easy to do with one person unless the television is too heavy to lift. I loosened the lock screws on the vertical bars attached to the television, extended the bracket mounted on the wall so that the television would be away from the wall, picked up the television from behind, then hung the television so that the inverted-U cutouts on the the vertical bars were caught on the top horizontal bar on the wall bracket. At this point the television is fairly secure so I tightened the lock screws to secure the television to the wall bracket.The kit comes with an assortment of bolts and spacers to fit the various sizes covered by the VESA standard. There are also spacers in case the television has connectors that would be located under the mounting bars. This provides a bit of space to reach the connector but you might have to connect the cable to the television then attach the mounting bars to the television using the spacers.I installed a Mounting Dream MD2413-MX earlier this year but prefer this one. The vertical bars attached to the television obstruct less of the television back than the large X on the MD2413-MX. This MD2377 mount allows the television to be positioned to the left or right of centre. This MD2377 permits levelling the television to make up for the wall mount not being installed perfectly vertically.I recommend and would buy another one of these mounts if installing another television.

  9. 18

    by Michael D

    This review will do this mount no justice. This wall mount is by far the simplest, easiest and cost effective mount you can find. Trust me; I looked.Prior to purchasing I went to several big box stores and I unsuccessfully searched for a mount design similar to this. I came close a few times but the price was triple what this mount cost.When I found this mount on Amazon, I was hesitate to purchase it. It looked too simple, too cheap and it was a name brand that I wasn’t familiar with.I am so glad that I purchased this mount. It’s VESA bracket installation was simple on the 50 inch Sony TV I had just purchased. Four screws into the bracket which may or not need plastics spacers (included in the mount) and your ready to hang it on the arm.The arm installation was four more large screws with washers and it was complete. The mount even includes a magnetic level which assists in getting things level before you tighten the last screws. Once that’s complete, you hang the tv (via the bracket) on the arm and your done.This mount has the ability to make finite adjustments for level and tilt once the TV is mounted as well.Once again, I couldn’t be more happy with this mount and I highly recommend it.Make and model of TV: 49” Sony Bravia X800E – 26.9 lbs

  10. 18

    by Tommy Poulin

    Un support très solide qui permet plusieurs ajustements pour offrir un produit tout à fait génial. Je m’attendais de payer 100$ pour un support et là pour 40$, je trouve un support plus robuste que ceux que j’avais pu voir en magasin et surtout facile à installer. Bcp d’accesspires aussi d’inclus pour s’assurer d’avoir les bonnes bots pour fixer la télé et le petit niveau aimanté est utile pour l’installation!Je conseille ce produit pour tous les gens qui veulent mettre leur téléviseur au mur. Mon écran est de 49 pouces et aucun problème!

  11. 18

    by Michael D

    This review will do this mount no justice. This wall mount is by far the simplest, easiest and cost effective mount you can find. Trust me; I looked.Prior to purchasing I went to several big box stores and I unsuccessfully searched for a mount design similar to this. I came close a few times but the price was triple what this mount cost.When I found this mount on Amazon, I was hesitate to purchase it. It looked too simple, too cheap and it was a name brand that I wasn’t familiar with.I am so glad that I purchased this mount. It’s VESA bracket installation was simple on the 50 inch Sony TV I had just purchased. Four screws into the bracket which may or not need plastics spacers (included in the mount) and your ready to hang it on the arm.The arm installation was four more large screws with washers and it was complete. The mount even includes a magnetic level which assists in getting things level before you tighten the last screws. Once that’s complete, you hang the tv (via the bracket) on the arm and your done.This mount has the ability to make finite adjustments for level and tilt once the TV is mounted as well.Once again, I couldn’t be more happy with this mount and I highly recommend it.Make and model of TV: 49” Sony Bravia X800E – 26.9 lbs

  12. 18

    by Joe W Shum

    First of all, the HDMI cable was missing :p but not a big deal to me, so I let that slide.This unit is very smooth and sturdy. Quick and simple to install. Fully adjustable, other than leveling it by rotating clockwise or anti-clockwise. You can also offset it left or right so you won’t position dead on the center of the stud. My 55 inch OLED is 40 lb. I can fully extend its arm and swiveling it left and right with ease while remain sturdy.That’s why they deserve 5 stars.

  13. 18

    by CONSERIERE

    J’ai placé le support sur une TV 2 32 pouces.c’est vraiment un support de très bonne qualité qui maintient superbement la télévision.Très facile à placer j’ai pu le placer seule!Je suis très heureuse de mon achat et le recommande vivement. De plus la livraison a été ultra rapide il est même arrivé à l’avance pour moi. Merci beaucoup

  14. 18

    by MrNappy

    Quality build, includes all types of screws and adapters, only thing extra I needed to pick up was special wall anchors for the metal studs in my condo. Mounted up my 35″ and 55″ inch TV, in the bedroom and livingroom. Adjustments to tilt and rotations are easy and can be locked in by tightening the screws. Just a suggestion I added some sticky soft pads to some of the corners , so they don’t scratch the walls when you fold the TV right up to the wall. Very impressed with the purchase . Five stars for the quality and price

  15. 18

    by V. Nadeau

    Vraiment parfait ! Je suis allée au magasin pour en acheter un, mais je n’ai jamais trouvé le rack parfait. J’avais un peu peur en commandant sur Amazon, malgrés les bons commentaires… Mais sérieusement je ne regrette pas du tout ! Il est juste parfait et que dire du prix !

  16. 18

    by Patrick

    Amazing!!!! This product is perfect for hanging up a TV. I bought it not sure what to expect. It comes with everything you might need to hang it up….even includes an HDMI cable….Lots of bolts and even a little level to ensure it is level during the set up. I have to say the quality of this product is impressive for the price. Clean welds….Velcro straps to help tidy up the cables after set up….the product itself is very light, and has several adjustments which can be made…such as some tilting… For installation I would recommend owning some tools like a drill….some sockets, an impact driver and a Stud finder….If installing into concrete it comes with hardware for that too….why put 4 holes in your wall when you can use this little guy and just put two….? Follow the weight limit and you will be fine….I can ‘t remember off the top of my head what the limit was, but I think it was like 25Kilos…or 30 kilos. I have use two of these to set up 50 Inch TV’s…one is an LCD and the other is a 4K LED….both are rock solid…If I ever need another stand I will buy another one of these for sure.

  17. 18

    by N David

    I bought this for my 32″ Sharp LED smart TV that I’m using for my exercise room. This is the 2nd wall mount that I’ve ever purchased, but it’s my first full motion mount. I’m very handy so installation was a breeze. The mount it solidly made, comes with a ton of hardware for different styles or TVs and wall materials, and includes 3 Velcro straps, an Allen key, and a decent looking HDMI cable. Considering it’s a full motion mount, my TV sits pretty close to the wall. Pivoting the TV left to the right is smooth and effortless. Pivoting the TV up and down requires loosening a screw, which is fairly easy to do. Overall, I’m very happy with the mount and would purchase it again.

  18. 18

    by Tommy Poulin

    Un support très solide qui permet plusieurs ajustements pour offrir un produit tout à fait génial. Je m’attendais de payer 100$ pour un support et là pour 40$, je trouve un support plus robuste que ceux que j’avais pu voir en magasin et surtout facile à installer. Bcp d’accesspires aussi d’inclus pour s’assurer d’avoir les bonnes bots pour fixer la télé et le petit niveau aimanté est utile pour l’installation!Je conseille ce produit pour tous les gens qui veulent mettre leur téléviseur au mur. Mon écran est de 49 pouces et aucun problème!

Main Menu